Flow cells are used for measuring samples with continuous flow. They may also be used in sipper systems where individual samples are aspirated into and out of the cell either by a syringe or pumping system. A wide variety of flow cell designs are available because different applications require the optimisation of sample availabilty, by sample volume contraints, beam geometry, flow characteristics and path length. Instruments also have differing tube connection requirements relating to the pumping sytem used. The range of flow cells we manufacture is extensive.
Consult the chart below to see which flowcell will work for you. If you have any questions either technical or otherwise, please e-mail us and we will answer your questions promptly.
Starna Flow Cells for Fluorometers
| Cell Type | Sample volumes | Tubing connection | Window aperture shape | Reason to use this cell type |
|---|---|---|---|---|
| Type 71F | 3.0 ml | Push-on | Rectangular | Maximum aperature size |
| Type 72F | 1.8 ml | Push-on | Rectangular | Maximum aperature height, lower volume |
| Type 73F | 0.008 to 0.715ml | Push-on | Rectangular | Low volume, many sample sizes |
| Type 583F | 0.011 to 0.440 ml | M6 Threaded | Rectangular | Lower volume, wide range of sample sizes |
| Type 46F/47F | 1.6 to 4.0 ml | Push-on | Rectangular | Linear (bottom to top) flow cells |
Starna Cells, Inc PO Box 1919, Atascadero, CA 93423 USA
Phone: 805-466-8855 Fax: 805-461-1575 email: sales@starnacells.com